Modify your gun to except my new products
If you have a spud gun with a 1.5" barrel you can make the modifications below to allow you to use any of my barrels. The picture below will show you how to modify your barrel to the new design. After you make the modifications check out my New Products page.
After cutting barrel, clean off the edges, pre fit the couplers to the barrel to make sure they will go on easy. Remove the couplers and apply PVC cement to the barrel and inside of the couplers. Slide the female coupler onto the combustion chamber and the male coupler (exposed threads) onto the barrel.. After the cement is dried the barrel can be screwed onto the combustion chamber. The gun is now ready for use.
If you have difficulty obtaining the couplers, contact me and I will supply them for $1.00 each and $3.00 postage. If you have any problems understanding this modification E-mail me.
Copyright (c), 1997 - 2008 www.spudgun.com
