newgun2.JPG (22029 bytes)

Spud Muff

Your gun making too much noise? Waking up the neighbors at 2 am when your party wants to see a night shot? This SPUD MUFF will reduce your noise level by at least 50%.  This device can be constructed with simple hand tools and construction time is about 3 to 4 hours.

Now you can get the plans (drawings and instructions) for making  a Noise Pollution Containment Device (N.P.C.D.).

These plans will give you step by step instructions on how to construct the SPUD MUFF. All parts can be purchased at a good hardware store and you will need simple tools (files, drill, tape, glue, screen, etc) to construct the Spud Muff. The plans will include part description and part numbers needed for both 1.5" and 2" barrels.

The pictures are showing a 1.5" Spud Muff.

muff1.jpg (2612 bytes) The completed Spud Muff.

The plans for making a Spud Muff are $5.95 which includes shipping and handling. Plans can be mailed (US postal) or Emailed to your site. All files are in JPG format that can be viewed on your browser. You can also print the plans directly to your printer for a hard copy. You will receive step by step instructions on how to assemble and a full parts list needed to make a Spud Muff.

Copyright (c), 1997

Back to Products page